The term ?dissipation loss? can be found in the data sheet for a pressure sensor or pressure transmitter. One needs this specification in order to be in a position to protect the pressure sensor from overheating.
In case a pressure sensor is operated in a hot environment, it can be essential to limit its electrical energy. If one neglects this aspect, one possibly risks an overheating sufficient reason for this, in the worst case, a total failure of the instrument. So how can the correct electrical connection be managed?
Determination of the right electrical connection on the basis of the dissipation loss
First, the utmost permissible electrical energy for the pressure sensor should be known. This is given in the data sheet as the dissipation loss. Please be Desperate that the dissipation loss could be dependent upon the utmost expected operating temperature of the instrument and must be calculated where necessary.
If the allowable dissipation loss has been determined correctly, then the actual maximum electrical energy for the pressure sensor occurring can be determined. The determination can be executed expediently in two steps:
1. Determination of the voltage at the pressure transmitter utilizing the following formula:
UPressure transmitter = UVoltage source ? RLoad � Imax. Current supply
2. Calculation of the utmost electrical power for the pressure transmitter through the following equation:
PPressure transmitter = UPressure transmitter � Imax. Never for the pressure transmitter (PPressure transmitter), that is now known, must be smaller than the permissible dissipation loss. If this is the case, both the power (UVoltage source) and the load (RLoad) were properly calculated and the electrical power of the pressure sensor will undoubtedly be within the permissible range under all operating conditions. Consequently, the pressure transmitter will not heat too strongly and can withstand the mandatory operating temperatures.
Note
In the event you need any advice, your contact will gladly assist you to.